import
Why are distances in Garmin Training Center and TrailRunner sometime different?
21/09/08 02:22 Filed in: Import
Problem: The ForeRunner device displays a distance for a workout. Garmin Training Center displays the same distance but TrailRunner displays a different distance.
Background: Your ForeRunner records geographical data points during the workout. At the same time your ForeRunner internally sums up the distance for the workout. It could sometimes happen that if you sum up the distances between each data points the result will be different to what the ForeRunner has summed up during the workout.
Reason: If you have intelligent recording enabled on your ForeRunner and the GPS signal quality isn't too good, the device will alter the recorded geographical course after it knows better. Problem is that at the same time the overall distance should also be adjusted, which is not the case.
Status: TrailRunner takes only the geographical information from the workout and takes this as the base. If your ForeRunner has internally stored a different distance, TrailRunner assumes this as an error in the ForeRunner device as it delivers contradictory information.
Background: Your ForeRunner records geographical data points during the workout. At the same time your ForeRunner internally sums up the distance for the workout. It could sometimes happen that if you sum up the distances between each data points the result will be different to what the ForeRunner has summed up during the workout.
Reason: If you have intelligent recording enabled on your ForeRunner and the GPS signal quality isn't too good, the device will alter the recorded geographical course after it knows better. Problem is that at the same time the overall distance should also be adjusted, which is not the case.
Status: TrailRunner takes only the geographical information from the workout and takes this as the base. If your ForeRunner has internally stored a different distance, TrailRunner assumes this as an error in the ForeRunner device as it delivers contradictory information.
|
Does TrailRunner support the Polar XXX monitor?
15/09/08 22:53 Filed in: Import
Problem: TrailRunner is not able to directly import Polar Workout data from the monitor.
Solution: With the helper application TrackRecord you can download workouts for some SonicLink Polar devices but Infrared is not supported. If you can manage to download HRM files with e.g. a windows emulator and Polar software you can import the file into TrailRunner. But it requires that you have worn a foot-pod during the workout as TrailRunner relies on the distance information to display a workout chart and merge the workout data with the course of a route.
> Supported Devices
Solution: With the helper application TrackRecord you can download workouts for some SonicLink Polar devices but Infrared is not supported. If you can manage to download HRM files with e.g. a windows emulator and Polar software you can import the file into TrailRunner. But it requires that you have worn a foot-pod during the workout as TrailRunner relies on the distance information to display a workout chart and merge the workout data with the course of a route.
> Supported Devices
What's the difference between the main document window and the diary?
13/08/08 09:00 Filed in: Conceptual
Problem: I expect that when I import new workouts into the main document, the main document should behave like a journal. But on the other hand there’s the diary where I can enter additional information on workouts. Why are these two separated?
Explanation: Unlike pure journaling applications, TrailRunner has two modes. The route planning mode and the diary mode. These two modes are separated into the main window (with the primary focus on building a network of tracks to plan routes within) and the diary (with the main focus of archiving the raw data of recorded workouts). Even though seperated, TrailRunner still displays workout information for a selected route in the main window (if a related workout can be found in the diary).
Advice: When you import new workouts, make up your mind, if the workout course contains track segments you would like to add to your network of tracks. If so, use one of the merge options. If you (just) want to archive your workout in the diary, check the add diary option.
Tip: Unlike the main document, your diary is stored in a central location on your Mac. As you can have more than just one document, each of your documents could cover a different networks of tracks. For example you would like to have one document for your neighborhood and more for each location you where on holidays.
Additionaly, if you delete a route from the main document, it would not delete any workouts in the diary and vice versa. Both are a separate thing even though they might be related to each other.
Explanation: Unlike pure journaling applications, TrailRunner has two modes. The route planning mode and the diary mode. These two modes are separated into the main window (with the primary focus on building a network of tracks to plan routes within) and the diary (with the main focus of archiving the raw data of recorded workouts). Even though seperated, TrailRunner still displays workout information for a selected route in the main window (if a related workout can be found in the diary).
Advice: When you import new workouts, make up your mind, if the workout course contains track segments you would like to add to your network of tracks. If so, use one of the merge options. If you (just) want to archive your workout in the diary, check the add diary option.
Tip: Unlike the main document, your diary is stored in a central location on your Mac. As you can have more than just one document, each of your documents could cover a different networks of tracks. For example you would like to have one document for your neighborhood and more for each location you where on holidays.
Additionaly, if you delete a route from the main document, it would not delete any workouts in the diary and vice versa. Both are a separate thing even though they might be related to each other.